Dormer E650 Snitttappar með bor

Dormer

Véltappar

Combination drill-tap with a 30° spiral flute, for ISO-Metric thread M3 with 0.50 mm pitch and 6H class of fit, dimensions according to DORMER-ISO standard with 3.15mm shank and 2.5mm square drive, HSS with steam tempered surface finish and 30° helix angle for 1.5xD through hole threading in free machining steel

Dormer E650 Bor og snitttappi M3

Combination drill-tap with a 30° spiral flute, for ISO-Metric thread M4 with 0.70 mm pitch and 6H class of fit, dimensions according to DORMER-ISO standard with 4.0mm shank and 3.15mm square drive, HSS with steam tempered surface finish and 30° helix angle for 1.5xD through hole threading in free machining steel

Dormer E650 Bor og snitttappi M4

Combination drill-tap with a 30° spiral flute, for ISO-Metric thread M5 with 0.80 mm pitch and 6H class of fit, dimensions according to DORMER-ISO standard with 5.0mm shank and 4.0mm square drive, HSS with steam tempered surface finish and 30° helix angle for 1.5xD through hole threading in free machining steel

Dormer E650 Bor og snitttappi M5

Combination drill-tap with a 30° spiral flute, for ISO-Metric thread M6 with 1.00 mm pitch and 6H class of fit, dimensions according to DORMER-ISO standard with 6.3mm shank and 5.0mm square drive, HSS with steam tempered surface finish and 30° helix angle for 1.5xD through hole threading in free machining steel

Dormer E650 Bor og snitttappi M6

Combination drill-tap with a 30° spiral flute, for ISO-Metric thread M8 with 1.25 mm pitch and 6H class of fit, dimensions according to DORMER-ISO standard with 8.0mm shank and 6.3mm square drive, HSS with steam tempered surface finish and 30° helix angle for 1.5xD through hole threading in free machining steel

Dormer E650 Bor og snitttappi M8

Combination drill-tap with a 30° spiral flute, for ISO-Metric thread M10 with 1.50 mm pitch and 6H class of fit, dimensions according to DORMER-ISO standard with 10.0mm shank and 8.0mm square drive, HSS with steam tempered surface finish and 30° helix angle for 1.5xD through hole threading in free machining steel

Dormer E650 Bor og snitttappi M10

Combination drill-tap with a 30° spiral flute, for ISO-Metric thread M12 with 1.75 mm pitch and 6H class of fit, dimensions according to DORMER-ISO standard with 9.0mm shank and 7.1mm square drive, HSS with steam tempered surface finish and 30° helix angle for 1.5xD through hole threading in free machining steel

Dormer E650 Snitttappar með bor

Afbrigði

Fylgiskjöl

Vefverslun

Upplýsingar

Viðskipti