Dormer E524 Snitttappar UNF

Dormer

UNF, UNC, BSP, NPT Snitttappar

Set of straight flute hand taps NO6 for Unified National Fine thread UNF 10 with 32 TPI and 2B class of fit, consisting of 1 tap with a 6-8xP taper lead, 1 tap with a 4-6xP second lead and 1 tap with a 2-3xP plug lead, dimensions according to ISO 529 standard with 5.0mm shank and 4.0mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel and copper or copper alloys

Dormer E524 tappasett UNF 10-32 #6

Set of straight flute hand taps NO6 for Unified National Fine thread UNF 12 with 28 TPI and 2B class of fit, consisting of 1 tap with a 6-8xP taper lead, 1 tap with a 4-6xP second lead and 1 tap with a 2-3xP plug lead, dimensions according to ISO 529 standard with 5.6mm shank and 4.5mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel and copper or copper alloys

Dormer E524 UNF 1228 #6

Set of straight flute hand taps NO6 for Unified National Fine thread UNF 1/4" with 28 TPI and 2B class of fit, consisting of 1 tap with a 6-8xP taper lead, 1 tap with a 4-6xP second lead and 1 tap with a 2-3xP plug lead, dimensions according to ISO 529 standard with 6.3mm shank and 5.0mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel and copper or copper alloys

Dormer E524 UNF 1/4 #6

Set of straight flute hand taps NO6 for Unified National Fine thread UNF 5/16" with 24 TPI and 2B class of fit, consisting of 1 tap with a 6-8xP taper lead, 1 tap with a 4-6xP second lead and 1 tap with a 2-3xP plug lead, dimensions according to ISO 529 standard with 8.0mm shank and 6.3mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel and copper or copper alloys

Dormer E524 UNF 5/16 #6

Set of straight flute hand taps NO6 for Unified National Fine thread UNF 3/8" with 24 TPI and 2B class of fit, consisting of 1 tap with a 6-8xP taper lead, 1 tap with a 4-6xP second lead and 1 tap with a 2-3xP plug lead, dimensions according to ISO 529 standard with 10.0mm shank and 8.0mm square drive, HSS with bright finish for 1.5xD through or blind hole threading in free machining and plain carbon steel and copper or copper alloys

Dormer E524 Snitttappar UNF

Afbrigði

Fylgiskjöl

Vefverslun

Upplýsingar

Viðskipti