Förch EPDM Kítti 290ml

• For bonding FÖRCH EPDM sealing tape to building structure and other strips of tape
• Adheres perfectly to FÖRCH EPDM sealing tape without primer
• Extremely good adhesion to most (even damp) substrates typically used in construction without primer 
• Free from isocyanates, plasticisers, solvents and silicones
• Permanently plastoelastic
• High mechanical strength and elasticity
• Neutral curing, almost completely odourless
• Shrink-proof and free of trapped air
• Will not corrode metals
• Suitable for indoor and outdoor use
• Good resistance to UV and weathering
• Absorbs acoustic and mechanical vibrations

Usage instructions:

• Adhesive surfaces must be dry, clean, free of dust and grease, and stable
• Apply adhesive to the surface in a zig-zag pattern
• Stick EPDM sealing tape to the surface and carefully roll on (using a pressure roller)
• The layer of adhesive must be a minimum of 3 mm thick
• One 600 ml pouch is enough to cover approx. 0.5 m²
• Not suitable for creating seals against pressing water or surfaces made from PTFE, PE and PP
• Due to the different systems available on the market, we recommend carrying out preliminary tests on bitumen sheeting or coatings or implementing additional mechanical measures to secure the various components