VersaDrive TCT Holecutters are a high performance solution for cutting larger diameter holes quickly and effectively. Premium grade Tungsten carbide teeth provide ultimate cutting performance in a wide range of Structural steels including Stainless Steel and Cast Iron.
The go-to solution for fabricators and steel erectors needing to drill through heavy steel in locations and on projects where a rotary drill is more convenient and safer than a Magnetic drill.
VersaDrive TCT Holecutters have a patented non-slip, Hex shank suitable for use in any standard 1/2" drill chuck for cordless or pistol drills or used with a VersaDrive Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.
Product Benefits
<ul>
<li>Massive 70mm reach with 55mm depth of cut</li>
<li>Premium quality Tungsten Carbide teeth</li>
<li>Perfect for drilling heavy steel in remote locations</li>
<li>Use in standard 1/2" drill chuck</li>
<li>Use with magnet drill adapter</li>
<li>One piece design includes arbor &amp; (replaceable) pilot drill</li>
<li>Combine with the multisink tool to broach &amp; countersink in one operation</li>
<li>High strength, non-slip shank design</li>
</ul>

HMT VersaDrive TCT Holuborar 55mm

Holemaker Technology - HMT

Holuborar

HMT VersaDrive TCT Holubor 12 x 55mm

HMT VersaDrive TCT Holubor 13 x 55mm

HMT VersaDrive TCT Holubor 14 x 55mm (9/16")

HMT VersaDrive TCT Holubor 16 x 55mm (5/8")

HMT VersaDrive TCT Holubor 17 x 55mm (11/16")

HMT VersaDrive TCT Holubor 18 x 55mm

HMT VersaDrive TCT Holubor 20 x 55mm

HMT VersaDrive TCT Holubor 21 x 55mm (13/16")

HMT VersaDrive TCT Holubor 22 x 55mm (7/8")

HMT VersaDrive TCT Holubor 24 x 55mm (15/16")

HMT VersaDrive TCT Holubor 25 x 55mm (1")

HMT VersaDrive TCT Holubor 26 x 55mm

HMT VersaDrive TCT Holubor 30 x 55mm (1-3/16")

HMT VersaDrive TCT Holubor 32 x 55mm (1-1/4")

HMT VersaDrive TCT Holubor 36 x 55mm (1-1/4")

HMT VersaDrive TCT Holubor 42 x 55mm

Kjarnaborar

VersaDrive® TCT Holecutters are a high performance solution for cutting larger diameter holes quickly and effectively. Premium grade Tungsten carbide teeth provide ultimate cutting performance in a wide range of Structural steels including Stainless Steel and Cast Iron. These are rapidly becoming the go-to, alternative solution for fabricators and steel erectors needing to drill through heavy steel in locations and on projects where a rotary drill is more convenient and possibly safer than a Magnetic drill. VersaDrive® TCT Holecutters have a patented non-slip, Hex shank suitable for use in any standard 1/2" drill chuck for cordless or pistol drills or used with a VersaDrive® Rapid Lock adapter for use in a wide range of powertools such as Magnetic Drills.&nbsp;

Optimum life and performance when used with rotary pistol drills Good results can be achieved with SDS Drills when used in Rotary Only mode Replace supplied pilot drill with 101030P-0003 Saving* ejector pin for use with a Magnet Drill or MultiSink Suitable for use on Stainless Steel Use appropriate lubrication and correct RPM to achieve long tool life&nbsp;

HMT VersaDrive TCT Holubor 46 x 55mm (1-13/16")

HMT VersaDrive TCT Holuborar 55mm

Afbrigði

Fylgiskjöl

Vefverslun

Upplýsingar

Viðskipti